T-SEP Assembly
T-SEP (Tube Separation Assembly) is an assembly to separate pneumatic tubes. An anti- corrosion device, T-SEP is designed to allow corrosive elements to escape tubing before corrosion would develop. T-SEP Assembly consists of four main parts: Flat Bar, I-Rod, Tube Spacer and Hardware.
Flat Bar is manufactured from 6061 series aluminum. Dimensions: 1/4 x 1” wide x L. Flat Bar will be prefabricated to fit tray size, hardware access will be installed.
The I-Rod® is a durable thermoplastic, extruded and cut into 1/2 round. I-Rod has excellent compressive strength, UV stability and a very low friction coefficient. The I-Rod will be prefabricated to accept matching flat bar and hardware. Two identical pieces will be supplied with assembly.
Tube Spacer is manufactured from stainless steel grade 316. Spacers are available 1/4", 3/8”, 1/2” and 3/4" diameter tubing. Spacers may be adapted to accept number of tubes required. Spacers are designed for minimal contact with tubing yet durable to maintain separation.
Hardware 1/4 – 20 SS316 Hex Head Bolts, 1/4 – 20 SS316 Flat Washers and 1/4" SS316 Lock Nut are provided with the T-SEP Assembly. In order to maintain a 6” or less separation for hardware, access holes will be installed as follows:
2”, 3” and 4” wide channel tray (One Hole)
6”, 8”, 9”, 10”, 12”, 18”, wide tray (Three Holes)
24” wide tray (Four Holes)
30” and 36” wide tray (Six Holes)
Where multiple holes are installed, matching hardware will be supplied unless specified otherwise.
How to Order
To order T-SEP Assembly, please indicate tube diameter and number of tubes along with support method (fiberglass channel tray 2, 3, 4, 6, 8, or 10 inch wide) or (Ladder tray 6, 9, 12, 18, 24, 30, or 36 wide). PFS will supply the proper T-SEP Assembly.
