ARC-3000 Stud Welder
- Designed and built in U.S.A.
- Constant current output
- Single or dual gun systems
- Independent gun controls
- Precise weld time and weld current adjustments
- Digital display of actual weld time and weld current
- Diagnostic L.E.D.'s
- State-of-the-art gun control circuitry
- Built in chuck saver
- Auto-safety shutdown
The Pro-Weld International ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been incorporated into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggering and eliminate damage to printed circuit boards. The ARC-3000 system is capable of welding studs from 1/4" diameter to 1-1/4" diameter with preciseness and repeatability.
Components
| Description | Part No. |
|---|---|
| System, Dual | 100-0207D 3000 |
| System, Single | 100-0207S 3000 |
| Ground Cable 25 ft. x 4/0 | 125-0110 3000 |
| Combo Cable 50 ft. x 4/0 | 125-1002 3000 |
| Power Supply, Single | 200-0016 3000 |
| Power Supply, Dual | 200-0017 3000 |
| Weld Gun | 300-0601 3000 |
Specifications
| Dimensions | 36" H x 28" W x 40" D |
|---|---|
| Output | 3000 Amps @ 45 VDC |
| Weight | 950 lbs |
| Input | 230/460/575 VAC |
| Fusing | 400/200/180 Delay Type 3 Phase/60 Cycle |
| Time Control | Stepless Adjustable .1-1.8 sec |
| Current Control | Stepless Adjustable 400-3000 Amps |
| Duty Cycle | 1/4 - 3/8 Unlimited, 1/2" 60/Min, 5/8" 30/Min, 3/4" 20/Min, 7/8" 15/Min, 1" 10/Min |