Our Products » Tsep Assembly » 10 Inch Channel Tray

T-SEP Assembly for 10" Channel Tray

(pdf download)
Hardware Mounting Hole Access Diameter 3/8 (.375) # of Mounted Hardware Access Holes Hole Location Tube Access Area
Hardware Used 1/4" (.250) 2 (2) @ 3/8" (.375) ea end C/L Typ. 8 5/8" (8.625)
Tolerance 1/8" (.125) 3 (2) @ 3/8" (.375) ea end C/L Typ.
(1) @ 4 5/8" (4.625) middle C/L Typ. 		8 1/4" (8.250)
  4 (2) @ 3/8" (.375) ea end C/L Typ.
(2)- Specify 		7 7/8" (7.875)
  5 (2) @ 3/8" (.375) C/L Typ.
(2)- Specify 		7 1/2" (7.500)
A B C  
Tube Diameter Height Spacer Tine C/L Typ. Max tube 2 hole configuration Max tube 3 hole configuration Max tube 4 hole configuration Max tube 5 hole configuration
1/4" 1 1/2" .375" 23 22 21 20
3/8" 1 5/8" .500" 17 16 15 15
1/2" 1 3/4" .625" 13 13 12 12
3/4" 2" .875" 9 9 9 8
1" 2 1/4" 1.250" 6 6 6 6
10 inch Channel Tray - TSEP Assembly
Notes
  1. SS316 Pneumatic Tubing Spacers: 1/4" TS-250M, 3/8 TS-375M, 1/2 TS-500M, 3/4 TS-750M, and 1" TS-100M also available with epoxy powder coated finish to Mil Spec # MIL-C-24712
  2. I-ROD: 1" half round is a UV-Stable, high impact thermoplastic Mfg. Deepwater Corrosion.
  3. Flat Bar to be 1" wide x 1/4" thick, stainless steel grade 316 or aluminum 6061-T6. Other thickness available upon request.
  4. Bar shims (1/8" thick x 1" wide) or flat washers are used to raise top flat bar retainer to level when tube size varies.
  5. When two T-SEP Assemblies rest in tandem, there exists a 1 1/8" (1.125) inch space where the assemblies meet. 1 1/8" (1.125) must be deducted from overall tube access area for each occurrence.
The T-SEP Assembly is a trademark of Production Fastening Systems, L.L.C