PFS now offers the ESLP type hanger which combines the versatility of the ESL type electrical slotted cable hanger (PFS Introduced in 1991) and the SLP type horizontal slotted pneumatic tube support (PFS Introduced in 1991) on the same device. The ESLP allows ease of installation which fastens to the 3/8 16 weld stud, the 3/8 16 Hilti X-BT stud, or any other fastener that will accept the female tapped 3/8 16 diameter ferrule located at the center of the support. Turn radius for the ESLP is identical to the ESL and SLP type. The ESLP is available in 2″: (ESLP-2), 3″: (ESLP-3) and 4″: (ESLP-4) lengths.
The ESLP-2 consists of one vertical slot with 2″ of work space for electrical cable and two horizontal slots offering 1.62″ from end to end work space for tubing.
The ESLP-3 consists of two vertical slot with 3″ of work space for electrical cable and two horizontal slots offering 2.62″ from end to end work space for tubing.
The ESLP-4 consists of three vertical slot with 4″ of work space for electrical cable and two horizontal slots offering 3.62″ from end to end work space for tubing.